How to Setup Wireless Home Network?

In the field of wireless networking system, introduce which is helpful for ding the networking in the home called as wireless home network. It is defined as the connection that is build for the wireless networking in the home for the sake of sharing different types of resources such as printing in the home at the same time on the internet is referred as Wireless home Networking.  

Different steps are involved in building the wireless network for the home networking. The important steps that are involved in the setting the network is given below

Important Hardware:

The important hardware that is required for the building of the wireless home network is different types of components such as more than one computer or the operating systems at least two, different types of networking interface cards or adapters are required for proper networking, wireless router and the very important part that is the modem that is required to do the configuration.

Building Process:

Several steps are involved in building the wireless home network for the sake of doing the work on the internet and share different type of resources such as printing etc. arte as follows:

1.      First, shut down all the computers and then open the cover of the system and place the Network Interface Card (NIC) in the system if it was not placed before. After placing turn on the server system and install the required software for the working of the NIC. Then do the same configuration in all other system attached for home networking.

2.      After installing the software of the (NIC), turn on your modem and the wireless router to for the connection to the internet or the network. Then change the network settings up to manual settings and change the security settings by using the control panel of your operating system by following the instructions given on the screen. Save these settings because they will be use in the completion of the setup.

3.      When the changing of security and the network settings is completed then, configure your wireless router that is used for creating the wireless home networking media by typing your IP address of the router into your browser such as internet explorer.

4.      After router configuration, configure your wireless network by changing the mode of security by entering the same key of that was used earlier in the settings. This key or setting should be matched with the saved settings.

5.      Then click APPLY or OK to complete the setup. After this step, your wireless home network has been configured.